Acetone

Acetone

1. Product introduction

Acetone, also known as dimethyl ketone, is an organic compound with the molecular formula C3H6O. It is the simplest saturated ketone. It is a colorless transparent liquid with a slight aroma [5]. Soluble in water and methanol, ethanol, ether, chloroform, pyridine and other organic solvents. Flammable, volatile, more active chemical properties. As solvent in industry mainly, use explosives, plastic, rubber, fiber, leather, grease, paint and other industries, also can be used as a synthetic ketene, acetic anhydride, iodoform, polyisoprene rubber, methyl methacrylate, chloroform, important raw materials such as epoxy resin, also often be criminals do raw material drug bromine generation of benzene acetone.

2. Product Parameters (Specifications)

3. Product features and uses

Acetone is a representative compound of aliphatic ketones, which has typical reactions of ketones. For example, a colorless crystalline adduct formed with sodium bisulfite. Reacts with hydrogen cyanide to form acetone cyanoalcohol. Isopropanol and frequenone are formed under the action of reducing agent. Acetone is more stable with the oxidizer. Will not be oxidized by nitric acid at room temperature. Acetic acid, carbon dioxide and water are produced when strong oxidant potassium permanganate is used as oxidant. In the presence of base, bimolecular condensation occurs to form diacetone alcohol. [2]

2mol acetone generates isopropyl acetone in the presence of various acidic catalysts (hydrochloric acid, zinc chloride or sulfuric acid), and then is added with 1mol acetone to form formone (diisopropyl acetone). Under the action of concentrated sulfuric acid, 3mol acetone was removed from water to form m-trimethylbenzene. Isophorone (3,5, 5-trimethyl-2-cyclohexene-1-one) is synthesized in the presence of lime, sodium alcohol or sodium amino [3].

In the presence of acid or base, condensation reaction occurs with aldehydes or ketones to form ketone alcohols, unsaturated ketones and resinous substances. Under acidic conditions, it was condensed with phenol to form bisphenol A. The α -hydrogen atom of acetone is easily replaced by halogens to form α -halogenated acetone. Haloform is formed by reacting with sodium hypohaloate or with an alkaline solution of halogens. Acetone reacts with Grignard's reagent, and the addition product is hydrolyzed to yield tertiary alcohol. Acetone and ammonia and its derivatives such as hydroxylammonium, hydrazine, phenylhydrazine can also occur condensation reaction. In addition, acetone cracking at 500~1000℃to produce ketene. [4] Isobutene and acetaldehyde were synthesized by silicon-aluminum catalyst at 170~260℃. Isobutene and acetic acid are produced at 300~350℃. It can not be oxidized by weak oxidants such as silver ammonia solution and newly prepared copper hydroxide, but can catalyze hydrogenation to produce alcohol.

Acetone is an important organic synthetic raw material, used in the production of epoxy resin, polycarbonate, plexiglass, medicine, pesticides and so on. It is also a good solvent for coating, binder, acetylene cylinder, etc. Also used as diluent, cleaning agent, extraction agent. It is also an important raw material for producing acetic anhydride, diacetone alcohol, chloroform, iodoform, epoxy resin, polyisoprene rubber, methyl methacrylate and so on. Used as solvent in smokeless powder, celluloid, acetate fiber, spray paint and other industries. Used as an extraction agent in oil and grease industry

4. Product details

Airtight operation, full seal. Operators must be specially trained and strictly abide by the operating procedures. It is recommended that operators wear a filter gas mask (half-mask), safety glasses, antistatic work clothes, and rubber oil-resistant gloves. Keep away from fire and heat source. No smoking in workplace. Use explosion-proof ventilation systems and equipment to prevent steam leakage into the workplace air, and avoid contact with oxidizers, reducing agents, alkali. When filling, the flow rate should be controlled, and there is a grounding device to prevent electrostatic accumulation. Handling should be carried lightly to prevent damage to packaging and containers. Equipped with the corresponding variety and quantity of fire fighting equipment and leakage emergency treatment equipment. Empty containers may contain hazardous materials

 5. Delivery, transportation and services

Transportation vehicles should be equipped with the corresponding variety and quantity of fire fighting equipment and leakage emergency treatment equipment. It is best to ship in the morning and evening in summer. The trough (tank) car used in transportation should have a grounding chain, and the groove can be equipped with a hole partition to reduce the shock generated static electricity. It is strictly forbidden to mix and transport with oxidizer, reducing agent, alkali and edible chemicals. During transportation, it should be protected from sun exposure, rain and high temperature. Stay away from fire, heat source, high temperature area. The exhaust pipe of the vehicle carrying the goods must be equipped with fire retardant device. Mechanical equipment and tools that are easy to generate sparks are prohibited to be loaded and unloaded. Road transportation should follow the prescribed route, do not stay in residential and densely populated areas. Slip away should be forbidden in railway transportation. It is strictly prohibited to transport in bulk by wooden vessel or cement vessel. 1. This product is highly inflammable and has serious fire danger. It belongs to Class A fire dangerous substance. Store in a cool and dry place with good ventilation, away from heat source, fire source and contraindicated substances. All containers should be placed on the ground. But long stored and recycled acetone often acidic impurities, corrosive to metal.

2, packed in 200L iron drum, each net weight 160kg, iron drum should be clean and dry inside. Store in dry and ventilated place, keep the temperature below 35℃, prevent violent impact during loading, unloading and transportation, and prevent the sun and rain. Store and transport in accordance with the provisions of fire and explosion-proof chemicals.

3, stored in a cool, well-ventilated warehouse room, away from fire, heat source. The storage temperature should not exceed 29℃. Keep container sealed. It should be stored separately with oxidizer, reducing agent and alkali, and must not be mixed. Explosion-proof lighting and ventilation facilities are adopted. Do not use mechanical equipment and tools that may cause sparks. The storage area shall be equipped with leakage emergency treatment equipment and suitable storage materials.

6.FAQ

1.How many production lines in your factory?

Our company has two production lines.

2. How long is your delivery time?

Around 7 days to 15 days